{"id":220,"date":"2008-07-07T22:36:00","date_gmt":"2008-07-08T03:36:00","guid":{"rendered":"http:\/\/www.leucht.com\/blog\/?p=220"},"modified":"2008-07-07T22:53:56","modified_gmt":"2008-07-08T03:53:56","slug":"red-indicators-mean-everythings-fine","status":"publish","type":"post","link":"http:\/\/www.leucht.com\/blog\/2008\/07\/red-indicators-mean-everythings-fine\/","title":{"rendered":"Red indicators mean everything’s fine?"},"content":{"rendered":"

I was turning the lights off in the house a few nights ago and my eyes were drawn to the bright indicators coming from our new phone in the living room. Not one \u2026 not two \u2026 but three separate RED <\/strong><\/span>indicators were glowing and getting my attention on the main phone cradle, which doubles as an answering machine. Was the phone in trouble? <\/span>Was it screaming for my help? Was it about to die or self-destruct? Nope. These three red indicators happen to be completely normal for this model of phone.<\/p>\n

\"\"<\/a><\/p>\n

The little red line on the left is supposed to tell me that the phone is charging or is fully charged. It would cost a bit more to design and implement, but wouldn\u2019t it make a lot more sense to use red for charging and green for fully charged? What about a slowly blinking green for charging and a solid green for fully charged? Why is the manufacturer using a red indicator for a state that the phone is going to be in for 99% of the time? Isn\u2019t red supposed to indicate an abnormal situation or a problem to the average user?<\/p>\n

The light on the right tells me that the answering machine function is turned ON. Again, that\u2019s the normal mode for this device. Why red? I think green would be much more appropriate here.<\/p>\n

The red number in the middle tells me how many messages are stored on the machine. It flashes when there is a message on the machine that we haven\u2019t listened to. I think either red or flashing slowly is appropriate for new messages, but probably not both. Using both red and flashing is overkill in this case. And using red to tell me the number of old messages is not appropriate. Green would be nice.<\/p>\n

I suppose after a few weeks I\u2019ll get used to the three red indicators and the fact that they are red probably won\u2019t even phase me anymore. But is getting used to these red indicators being normal really a good idea? I mean, won\u2019t it cause me to give red indicators on other devices less criticality than they might deserve? As a software designer, I\u2019ve always been taught that red indicators were only to be used for errors or problems or critical situations where the users attention needed to be drawn immediately toward a situation for awareness and\/or corrective action. Who told the hardware and appliance designers that it was perfectly acceptable to use red for normal happy status indicators? Don\u2019t these companies perform human factors studies and usability studies and ask potential users for feedback before starting mass production?<\/p>\n

I\u2019m stuck with these red happy indicators now because even as picky as I am, I\u2019m not going go to the trouble of packing these phones back up and finding my sales receipt and carting these phones back to the store and then having to go to the trouble of researching to find another phone that actually uses happy colors for happy indicators. It\u2019s just too much trouble. I\u2019m stuck with these phones with their un-intuitive indicator colors.<\/p>\n

Let\u2019s quickly examine a few other fairly common electronic devices laying around my house that give me information in the form of lights and indicators:<\/p>\n

\"\"<\/a><\/p>\n

This tuner\/receiver uses a nice blue color for the main display, but it uses various red lights just to tell me about different modes that have been activated. These different modes are completely normal and should not be indicated in red, in my opinion.<\/p>\n

\"\"<\/a><\/p>\n

I haven\u2019t done any research on the topic, but I believe that a large percentage of digital alarm clocks today use red for their displays. Is red easier to see in the middle of the night without your glasses\/contacts than blue or green? Please educate me, because I don\u2019t understand this color choice.<\/p>\n

\"\"<\/a><\/p>\n

We love our iRobot Roomba floor vacuum and I couldn\u2019t be much happier with the user interface. While it\u2019s charging, the power indicator beats like a heartbeat and changes between orange and green. When fully charged it sits happily at solid green. This is intuitive to me. The folks at iRobot have a winner.<\/p>\n

\"\"<\/a><\/p>\n

In our computer room we have a DSL modem, a wireless router and also an Ethernet switch. Ninety nine percent of the time that I glance at these devices, all the lights are green. If I see a different color or no lights at all, then something is probably wrong.<\/p>\n

.<\/p>\n

[ photo of oven and\/or toaster oven goes here]<\/p>\n

.<\/p>\n

Stove and toaster oven lights are red when the heaters are on, even though that\u2019s the normal operation for that appliance. That okay in that case, because I want to be drawn to these lights if they are on for more than the relatively short period of time while I\u2019m cooking. In this case, I think it\u2019s okay to use red, since I could potentially burn my food or even burn down my house if this \u201cnormal\u201d mode of operation stays in use for long periods of time.<\/p>\n

I guess my whole point here is that there should be known acceptable uses and known undesirable uses of indicators, colors, etc. in the hardware industry just like we often see in the software user interface industry. Donald A. Norman, the author of the books \u201cThe Design of Everyday Things\u201d and \u201cThe Design of Future Things\u201d states the following in the latter book:<\/p>\n

“Every piece of equipment has its own code for beeps, its own code for lights. A small red light visible on an appliance could mean that electric power is being applied, even though the appliance is off. Or it could mean that the unit is turned on, that it is working properly. Then again, red could signal that it is having trouble, and green could mean it is working properly. Some lights blink and flash; some change color. Different devices can use the same signals to indicate quite different things. Feedback is meaningless if it does not precisely convey a message.”<\/p><\/blockquote>\n

\"\"<\/a>\"\" \"\"<\/a>\"\"<\/p>\n

I highly recommend both of these books. They are both worth reading whether you design websites, stand-alone computer applications, portable electronic devices, cars, or space vehicles.<\/p>\n

So please don’t use red indicators to tell me that everything is perfectly fine. I’m fairly certain the blue and green LEDs don’t cost that much more than the red ones. \ud83d\ude42<\/p>\n

Thanks for reading,
\nKurt
\n(overanalyzing our world for 38 years)<\/p>\n","protected":false},"excerpt":{"rendered":"

I was turning the lights off in the house a few nights ago and my eyes were drawn to the bright indicators coming from our new phone in the living room. Not one \u2026 not two \u2026 but three separate RED indicators were glowing and getting my attention on the main phone cradle, which doubles […]<\/p>\n","protected":false},"author":2,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":[],"categories":[109],"tags":[129,147,148,150,149],"_links":{"self":[{"href":"http:\/\/www.leucht.com\/blog\/wp-json\/wp\/v2\/posts\/220"}],"collection":[{"href":"http:\/\/www.leucht.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.leucht.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.leucht.com\/blog\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"http:\/\/www.leucht.com\/blog\/wp-json\/wp\/v2\/comments?post=220"}],"version-history":[{"count":0,"href":"http:\/\/www.leucht.com\/blog\/wp-json\/wp\/v2\/posts\/220\/revisions"}],"wp:attachment":[{"href":"http:\/\/www.leucht.com\/blog\/wp-json\/wp\/v2\/media?parent=220"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.leucht.com\/blog\/wp-json\/wp\/v2\/categories?post=220"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.leucht.com\/blog\/wp-json\/wp\/v2\/tags?post=220"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}