Kurt Leucht’s Blog

After not finding any kid furniture that we were completely happy with, I decided to design and create my own large rolling toybox and plastic-bin holding shelf that can turn into a desk as the kids grow up. If I can find some time, I might add some detailed plans for this project. But for now I’ll just post a couple of photos of the finished products.

. .

Leave a comment below or send me an email from the link at the very bottom of the website if you are interested in seeing some plans.

Kurt

A few years ago on my 15 year old concrete block house, one of my exterior window sills started cracking severely and eventually started falling off in large chunks. We had new windows installed, and that work basically did the old broken window sill in for good. I decided to try to form a new concrete window sill on my own. You can see in the photo below that the missing window sill and the broken pieces on the ground after I had ripped off all the loose pieces.

In the photo below, you can clearly see the rebar showing throughout the length of the fractured concrete surface. I guess that rebar didn’t help the sill stay in one piece. It actually helped break it apart once the crack had formed in the area of the rebar.

I got the surface really clean and free of dust and conrete pieces. Then I painted on concrete adhesive that I bought at my local home improvement store. I’ve never used this stuff before, so I don’t know how well it works. As you can see from the photo below, I then mounted some wood strips that were about a half an inch thick to the wall with tapcon screws. These wood strips would become the bottom and side surfaces for my concrete sill mold.

Then I screwed a 1×6 plank that I had laying around to the wood strips. I mounted the top of the plank at the same height that I wanted the top of the new window sill to end up being. I then mixed up some concrete and poured it into the mold. I made sure that the top surface of the new sill slanted down and away from the house. Otherwise, water would pool instead of running off. The photo below shows the mold filled with concrete and curing with plastic around it.

The new sill is perfect. Eventually I got the house painted and the photo below shows the final painted product.

Kurt

This was another case of seeing a product in a mail-order catalog and saying to myself, “I could make that, and it would cost me way less than 40 bucks!”

. .

I don’t really have a lot of details to talk about here. I saw this product, probably in an expensive Pottery Barn catalog or something. It was not a big deal to make. I just cut some boards to size, made rabbit joints and finish nailed them together. I put lots of coats of dark stain on it to get it as dark as I wanted it. I wish I would have made it about an inch wider, though. When we put magazines in it, they get rolled up at the bottom corner because the slot width gets skinnier at the bottom.

I saw this product in a magazine somewhere and thought, “Hey, I can make that!”

. .

So I did. I bought a plank of cheap pine board and cut out all the shapes and screwed them all together. The painting was the hardest part, and even that wasn’t too difficult.

Kurt

My stepdad is a professional welder. And one of the presents he gave me for Christmas 2004 was a heavy-duty custom wall-mounted plywood storage rack. It is deep enough to hold all of my hurricane plywood that I use to cover my windows. It’s a very nice design and I hope that some company out there will start selling these in your local home improvement store … at least in the Southeast US.

. . .

This is a placeholder for me to come back later and add detailed dimensions!!!!!!!

Kurt